Tel
139-1322-1199
2023-08-22
Cold dryer is a common industrial equipment, which is mainly used to remove moisture or moisture from objects or air to achieve dehydration and drying purposes. In the process of using the cold dryer, the following faults often occur, so find the right solution to deal with it easily!
1. The temperature of the cold dryer is too high or too low
The temperature of the cold dryer is controlled by the temperature of the coolant. If the coolant temperature is too high or too low, it will cause the cold dryer to fail to work normally. The solution is to first check whether the coolant temperature is too high or too low, and then adjust the temperature control device appropriately.
2. Insufficient coolant flow rate of cold dryer
Insufficient flow of coolant will cause the cold dryer to fail to work normally, resulting in long residence time of materials in the cold dryer. The solution is to check whether the coolant flow control device works normally, check whether the pipeline is blocked, and clean it up in time.
3. The moisture absorption performance of the cold dryer decreases
The decrease of moisture absorption performance of the cold dryer may be caused by the deactivation of the desiccant in the cold dryer or the long service time. The solution is to replace the desiccant, and regularly check and replace the desiccant.
Cold dryer
4. Unstable pressure of cold dryer
The pressure instability of the cold dryer may be caused by abnormal operation of the compressor or air leakage in the pipeline. The solution is to check whether the compressor works normally, check whether there is air leakage in the pipeline, and repair it in time.
5. The cold dryer is noisy
The noise of the cold dryer may be caused by equipment damage or unbalanced operation. The solution is to check whether the equipment is damaged, and if it is damaged, replace the corresponding parts.
6. Vibration of cold dryer equipment
The vibration of the equipment of the cold dryer may be caused by unstable installation or unbalanced placement of the equipment. The solution is to check the installation of the equipment to make it stable and ensure that the equipment is placed in a balanced manner.
7. The cold dryer is difficult to discharge
Difficult discharge of cold dryer may be caused by equipment blockage or poor lubrication. The solution is to clean up the blockage in the equipment and lubricate the equipment at the same time.
8. Water leakage of cold dryer equipment
Water leakage of cold dryer equipment may be caused by lax sealing of equipment or water leakage of pipeline. The solution is to check the sealing condition of the equipment, replace it in time if there is any problem, and check whether there is water leakage in the pipeline and repair it in time.
9. Circuit failure of cold dryer
Circuit faults of cold dryer may include short circuit and open circuit. The solution is to check the circuit connection of the equipment and repair or replace the faulty circuit components.
10. Wear of cold dryer equipment
Long-term use or improper operation will lead to wear of cold dryer equipment, such as belt wear and bearing wear. The solution is to check the wear of equipment regularly and replace the worn parts in time.